PM10/PM2.5,自動換膜顆粒物采樣器

PM10 - PM2.5順序(自動換膜)采樣器
LIFETEK PMS允許PM2.5可吸入分數和PM10可吸
如顆粒物自動順序（序列）采樣
PM2.5符合M.D60方法， 2002/02/04附件十一和2008/
50 / CE歐洲標準附件六，其中EN12341和EN14907
標準已生效
特點：
所有組件存儲于柜式機箱內，避免外部干擾，
可用在固定臺站，也適合安裝在移動設備上
主流的6m³/h旋葉泵，保障采樣面2.3m³/h的恒
定體積流量， 保持恒定的空氣經可吸入顆粒物切
割頭實現精確切割分離
采樣流量5-70L/min帶電子負載損失自動補償
帶濾膜壓降、環境溫度、大氣壓測量傳感器
干式體積流量計，最大誤差≤±2％
立即采樣、定時采樣、可編程采樣
斷電保護、來電自動恢復、事件記錄
報警與診斷
USB接口
GMS遠程遙控模塊（可選配）
容量： 16
膜尺寸： 47mm

PM10 PM2.5 SEQUENTIAL SAMPLING SYSTEM

The system LIFETEK PMS allows sequential samp領 of the PM 10 inhalable and of the PM2.5 respirable fraction PM 2.5 in compliance with the M.D.60 decree dated 02/04/2002 annex XI and with 2008/50/CE European standard annex VI where EN 12341 and EN 14907 standards are in force.
INSTRUMENT FEATURES
The instrument is supplied in a cabinet suitable to store all relevant components and it is made in order to grant suitable protection against atmospheric agents; the configuration suitable for the installation on mobile
devices is also available.
The high 6 m3/h rotary vane pump with high prevalence grants a costant
volume flow of 2,3 m 3/h in the samp領 pickup area where the granulometric
separation occurs in order to keep the speed of the air constant upon the PM10 or PM 2.5 heads input.
The sampler operation range is 5 to 70 l/min and it is equipped with an
electronic system for the automatic compensation of the losses of load.
It is also equipped with sensors for the measurement of the pressure fall on
the filter, of the atmospheric pressure and of the ambient temperature. The
volume is measured through volume dry flow meter with ± 2% max error.
The samp領 programming and the data supplied upon the samp領
comply with the M.D. 60 decree standards.The software allows the cyclic
repetition of the set programme and the initial delay to control the samp領
cycle. The stored data can be transferred to a USB pendrive.In case of power
failure interruption, the system stores the sampled data acquired, records the
event and grants the restart of the operation when the power supply is restored.
he samp領 system is set to use the GSM module (for the remote control of the samp領 and of the alarms through a text essage) and for the installation of a conditioning system for the filters storage at controlled temperature.
MODULE SELECT 16-The sequential module allows the automatic pick up
of the PM10 or PM 2.5 fraction on ? 47 mm filters inserted on suitable supports.
Operational autonomy is 16 filters.